StableNet MPLS, MetroE and Carrier Ethernet provides visibility into Layer 2 and Layer 3 MPLS and VPLS deployments. Leveraging topology and LSP path information collected via SNMP, StableNet can management MPLS/VPLS deployments including MP-BGP and End-to-End path monitoring.
 

StableNet® MPLS/VPLS management is part of the network management suite StableNet Telco. It helps you to removes performance bottlenecks by optimal utilization of network resources.

StableNet supports the following technologies:

• Layer 2 based on Internet draft draft-kompella-l2ppvpn-version, MPLS-based Layer 2 VPNs.
• Layer 3 based on Internet draft draft-ietf-l3vpn-rfc2547bis, BGP and MPLS IP VPNs. (aka VRFs)
• VPLS based on Internet draft draft-ietf-ppvpn-vpls-bgp, Virtual Private LAN Service. (aka Pseudo Wire)

Identify LSPs of VPNs

Display customer VPN topologies

StableNet Telco - MPLS, VPLS, MetroE, Carrier Ethernet
Feature	Advantage	Benefit
VPN Auto-Discovery	Auto-Detects Layer 2 and Layer 3 VPNs at PE routers and the LSPs accross the LSRs. Automatically discovers OSFP, MP-iBGP and VLAN trunks	Auto-populate your CMBD with the actually deployed VPNs from our routers. Cut support time to a minimum.
Network Visualization	Graphically displays VPN topologies per customer and/or per technology.	See the connectivity and status of elements in a graphical topology display.
Root-Cause and Impact analysis	Tracks the cause of a VPN End-to-End failure down to the LSR where the problem occurs	Provides ability to associated VPNs with customers to see customer and service impact to priorities NOC activities
Multi-Vendor Support	Works with a number of different hardware vendors including Cisco and Juniper	Improved scalability and flexibility in cross-domain and multi-vendor deployments

With StableNet® MPLS/VPLS management you are able to offer your subscribers new services!